| Output: |
| Voltage RMS, maximum > 43 Volts |
| Impedance 32 Ohms |
| Frequency response deviation from RIAA 20Hz to 20kHz ±0.1dB |
| |
| Input: |
| Total harmonic distortion + noise, 20Hz to 20kHz < 0.012% (MM, 10 Volts output) |
| Input sensitivity for 300mV RMS output 2.9mV Moving Magnet, 500µV Moving Coil |
| Input impedance MC: Switched, 10 Ohms internal, or user adjustable by external RCA-type loading plug. Without plug 47k Ohms. |
| Input capacitance 470pF. |
| MM: All switches up : 68k Ohms in parallel with 47pF, |
| - Switch no. 1 down : 47k Ohms + 47pF, |
| - Switch no. 2 down : extra 50pF added, |
| - Switch no. 3 down : extra 100pF added, |
| - Switch no. 4 down : extra 200pF added |
| Overload margin 42dB above rated input at 1kHz (MM) |
| Channel separation > 64dB 20Hz to 20kHz |
| Channel balance error < 0.5dB typical |
| Signal / noise ref. 1Volt RMS output > 78dB Moving Magnet ('A'-weighted) |
| > 75dB Moving Coil ('A'-weighted) |
| Frequency response reference IEC, RIAA |
| |
| General: |
| Input sockets: 2 phono Moving Magnet via RCA connector |
| 2 phono Moving Coil via RCA connector |
| Output sockets: 2 RCA connectors for line level output |
| Power requirements: 115 / 230 Volts or 100 V AC 50 / 60Hz (factory preset) 25 watts maximum |
| Dimensions: 483mm, wide 167mm, high (including feet) |
| 456mm, deep (including buttons and rear terminals) |
| Weights: 18.15Kg, unit only, unboxed |
| 23Kg, in shipping carton |
| Standard accessories: IEC mains lead - 10 Amp type |
| Moving coil pickup loading plugs, (2 each) of 100, 200, 500, 1K and 5K Ohms resistance |
| |
MUSICAL FIDELITY KW PHONO
