| Output: |
| Power 750 Watts per channel into 8 Ohms (29dBW), 1100 Watts per channel into 4 Ohms |
| Voltage, RMS 77.5 Volts 20Hz to 20kHz |
| Voltage, peak-to-peak 219 Volts |
| Current, peak-to-peak 250 Amps |
| Damping factor 204 |
| Output devices per channel 20 |
| Loop out impedance 50 Ohms |
| |
| Line inputs: |
| Total harmonic distortion + noise < 0.004% 20Hz to 20kHz |
| Signal / noise ratio > 124dB 'A'-weighted |
| Input sensitivity for 750 Watts into 8 Ohms 2.4 Volts |
| Input impedance 100k Ohms |
| Channel separation > 93dB typical |
| Frequency response 20Hz to 20kHz, +0, -0.2dB |
| |
| General: |
| Input 1 pair line level RCA connectors |
| Outputs 2 amplifier channels via 2 pairs per channel binding posts, 1 pair RCA loop output sockets |
| Power requirement 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), |
| 2500 Watts at maximum audio power into 8 Ohms, 290 Watts idle |
| |
| Dimensions: |
| Amplifier 483 mm, wide |
| 167 mm, high including feet |
| 553 mm, deep including rear terminals |
| Power supply 364 mm, wide |
| 167 mm, high including feet |
| 278 mm, deep including rear sockets |
| |
| Weight: |
| Amplifier 34.1 kg, unit only, unboxed 45.2 kg, in shipping carton |
| Power supply 18.4 kg, unit only, unboxed 21.4 kg, in shipping carton |
| |
| Standard accessories: |
| IEC mains lead - (16-Amp type) one, 2.4 metres |
| Low voltage interconnection leads two, 1.2 metres |
| Control interconnection lead one, 1.2 metres |
| |
MUSICAL FIDELITY KW 750 POWER
