| Output : |
| Voltage RMS, maximum > 62 Volts |
| Peak-to-peak instantaneous output current 4.5 Amps |
| Impedance < 0.5 Ohm |
| Frequency response 20Hz to 30kHz ±0.5dB |
| |
| Line inputs : |
| Total harmonic distortion + noise, 20Hz to 20kHz < 0.0068% (5 Volts output, maximum volume) |
| Signal / noise ref. 1 Volt RMS output > 105dB ('A'-weighted, at half volume) |
| Input sensitivity for 1 Volt RMS output 240mV |
| Input impedance 500k Ohms |
| Gain at maximum volume 12.5dB (4.2 times) |
| Overload margin 35dB for rated input at maximum volume |
| Channel separation > 84dB 20Hz to 20kHz, maximum volume |
| Channel balance error < 0.5dB typical, worst case 1.5dB with volume control at around 8 o'clock position |
| |
| General: |
| Input impedance 47k Ohms |
| Overload margin 24dB |
| Inputs 4 pairs line level RCA connectors, |
| 1 pair (Home Theatre) direct power amplifier input RCA connectors |
| Outputs 1 pair RCA main output controlled by the volume, |
| 1 pair RCA tape record fixed line level output. |
| Power requirement 115 / 230Volts or 100V AC 50 / 60Hz (factory pre-set), 60 Watts |
| Weight 20.55kg, 45.3 lbs unit only, unboxed |
| 25.5kg, 56.2 lbs in shipping carton |
| Dimensions 483 mm, 19 inches wide |
| 167 mm, 6.6 inches high including feet |
| 450 mm, 17.7 inches deep including knob and rear terminals |
| Standard accessories IEC type mains lead (10-Amp type), |
| remote control (kW universal type), |
| 2 batteries size LR03 or AAA, manganese alkaline type |
| |
MUSICAL FIDELITY KW PREAMP
