| Amplificateur intégré à tubes |
| 2 x 100 watts sous 8 Ohms |
| Possibilité 4 Ohms |
| 4 entrées sources |
| Montage ultra linéaire polarisé en classe AB |
| 8 lampes 6CA7/EL34 |
| |
| Maximum Power Output: 150 W per channel at 8 ohms, 1KHz |
| Rated Output Power: 100 W per channel at 8 ohms, 25Hz to 70KHz |
| Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB |
| Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz |
| Distortion THD: Less than 1% at 100 W output, 28Hz to 15KHz |
| Circuit Type: Ultra Linear, Class AB |
| Input Impedance: 100Kohms |
| Input Sensitivity: 500mV at 1KHz and 8 ohms for 100 watt output |
| Output Impedance: 4 ohms and 8 ohms |
| Negative Feedback: Less than 5 dB |
| Noise and Hum: 85dB below rated output |
| Tube Complement: 4 matched pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers. |
| Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option). |
| Dimensions: 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high. |
| Weight: 62 pounds net, approximately 74 pounds (25 Kg) packaged |
| |
JOLIDA JD-1000 RC
